Method of obtaining signal-to-noise values at the output of the synthesized antenna array of the ultrasonic stand in the presence of various types of active interference
https://doi.org/10.34680/2076-8052.2023.3(132).419-425
Abstract
A method of obtaining signal-to-noise values at the output of the synthesized antenna array of an ultrasonic stand in the presence of active interference is considered. This method uses an algorithm for implementing the experimental scenario, which has spatial correlations during processing radar information in an ultrasonic location stand. It is shown that when forming the measurement procedure, the spatial position of the transmitter and the angle reflector also contributes to the evaluation of the data obtained, as does the position of the interference source, which directly affects the formation of the result. Examples of the received information about the position of the corner reflector according to the ultrasonic location stand data with direct interference are given. The considered method makes it possible to conduct research to assess the effect of active interference and noise on the algorithms of operation and functioning processes of real radar stations based on an ultrasonic location stand.
About the Author
A. A. Semenov
A. F. Mozhaysky Military-Space Academy
Russian Federation
Russian Federation
Saint Petersburg
References
1. Kozlov A. V., Kosynkin A. I., Moroz A. V., Sakhno I. V. Tekhnologiya i rezul'taty polunaturnogo modelirovaniya v usloviyakh ul'trazvukovogo poligona sistemy tsifrovoy obrabotki trayektornogo signala RLS OZP, ispol'zuyushchey razlichnyye tipy slozhnykh shirokopolosnykh zondiruyushchikh signalov [Technology and results of semi-natural modeling in the conditions of an ultrasonic polygon of the digital processing system of the trajectory signal of the OZP radar using various types of complex broadband probing signals] // Radiolokatsionnoye issledovaniye prirodnykh sred [Proceedings of the 30th AllRussian Symposium "Radar research of natural environments"], April 18–19, 2017: In 2 volumes. Is. 12, vol. 2. St. Petersburg, A. F. Mozhaysky Military-Space Academy, 2017. 50-63.
2. Zvonarev V. V., Moroz A. V., Sherstyuk A. V. Metodika otsenivaniya kharakteristik diagrammy napravlennosti ul'trazvukovogo lokatora v rezhime sintezirovaniya apertury antenny [Methodology for estimating the characteristics of the directional pattern of an ultrasonic locator in the mode of synthesizing the antenna aperture] // Trudy MAI. 2019. 106. 6-26.
3. Makarenkov V. V., Moroz A. V., Sakhno I. V., Semenov A. A. Metodika formirovaniya diagrammy napravlennosti i rascheta otnosheniya signal-shum na vykhode sintezirovannoy antennoy reshetki ul'trazvukovogo lokatsionnogo stenda v usloviyakh pomekhovogo vozdeystviya [The method of forming a directional pattern and calculating the signal-to-noise ratio at the output of a synthesized antenna array of an ultrasonic location stand under interference conditions] // Vestnik Metrologa. 2021. 3. 28-33.
4. Dvorov A. N., Semenov A. A. Metodika polucheniya znacheniy signal-shum na vykhode sintezirovannoy antennoy reshetki ul'trazvukovogo stenda pri nalichii aktivnoy pomekhi [Method of obtaining signal-to-noise values at the output of a synthesized antenna array of an ultrasonic stand in the presence of active interference] // Vestnik Metrologa. 2022. 4. 7-11.
Review
For citations:
Semenov A.A. Method of obtaining signal-to-noise values at the output of the synthesized antenna array of the ultrasonic stand in the presence of various types of active interference. Title in english. 2023;(3(132)):419-425. (In Russ.) https://doi.org/10.34680/2076-8052.2023.3(132).419-425
Views:
23
Email this article 