vestnovsuВестник Новгородского государственного университетаVestnik of Novgorod State University2076-8052Новгородский государственный университет имени Ярослава Мудрого10.34680/2076-8052.2023.5(134).833-846vestnovsu-277Research ArticleСтатьиПрименение нано- и ультрадисперсных материалов для управления структурой и свойствами металлов в соединительных технологиях: мировая практика (обзор)The use of nano- and ultrafine materials for controlling the structure and properties of metals in connecting technologies: world practice (review)https://orcid.org/0000-0001-6804-4454СапожковС. Б.SapozhkovS. B.

Сапожков Сергей Борисович – доктор технических наук, доцент, директор Политехническогоинститута  

 Великий Новгород 

 Veliky Novgorod 

ssb@novsu.ruhttps://orcid.org/0000-0002-9176-0720ЗернинЕ. А.ZerninE. A.

Зернин Евгений Александрович – кандидат технических наук, доцент, заместитель директора Инженерной школы диагностики и промышленной безопасности  

 Великий Новгород 

 Veliky Novgorod 

Eugeny.Zernin@novsu.ruhttps://orcid.org/0009-0002-2302-8359ПетроваЕ. Д.PetrovaE. D.

Петрова Екатерина Дмитриевна – аспирант

Великий Новгород 

 Veliky Novgorod 

s238309@std.novsu.ruhttps://orcid.org/0000-0002-9751-116XПетровР. В.

Петров Роман Валерьевич – доктор физико-математических наук, доцент, профессор, главный научный сотрудник 

 Великий Новгород 

Roman.Petrov@novsu.ruhttps://orcid.org/0000-0002-9144-340XЗахаровМ. А.ZakharovM. A.

Захаров Максим Анатольевич – доктор физико-математических наук, доцент, профессор

 Великий Новгород 

Veliky Novgorod

Maxim.Zakharov@novsu.ruНовгородский государственный университет имени Ярослава МудрогоРоссияYaroslav-the-Wise Novgorod State UniversityRussian Federation20230802202405(134)833846Copyright © Сапожков С.Б., Зернин Е.А., Петрова Е.Д., Петров Р.В., Захаров М.А., 20242024Сапожков С.Б., Зернин Е.А., Петрова Е.Д., Петров Р.В., Захаров М.А.Sapozhkov S.B., Zernin E.A., Petrova E.D., Петров Р.В., Zakharov M.A.Данная работа распространяется под лицензией Creative Commons Attribution 4.0.This work is licensed under a Creative Commons Attribution 4.0 License.https://vestnovsu.elpub.ru/jour/article/view/277

В работе представлен обзор применения нано- и ультрадисперсных порошков в качестве функциональных добавок при различных способах дуговой сварки (наплавки) плавлением. Рассмотрены способы введения нано- и ультрадисперсных порошков в жидкую сварочную ванну. Приведены результаты экспериментальных исследований процессов пайки. Сформулированы задачи дальнейших исследований в области практического применения нано- и ультрадисперсных материалов для соединительных технологий.

The paper presents an overview of the use of nano- and ultrafine powders as functional additives in various methods of arc welding (fusion surfacing). Methods for introducing nano- and ultrafine powders into a liquid weld pool are considered. The results of experimental studies of soldering processes are presented. The objectives of further research in the field of practical application of nano- and ultradisperse materials for connecting technologies are formulated.

нано- и ультрадисперсные порошкимодифицирование наплавленного металласваркапайкаnano- and ultra-disperse powdersmodification of deposited weld metalweldingsolderingReferencesPaton B. E., Ishchenko A. Ya., Ustinov A. I. Application of nanotechnology of permanent joining of advanced light-weight metallic materials for aerospace engineering // The Paton Welding Journal. 2008. 12. 2-8.Paton B. E., Ishchenko A. Ya., Ustinov A. I. Application of nanotechnology of permanent joining of advanced light-weight metallic materials for aerospace engineering // The Paton Welding Journal. 2008. 12. 2-8.Pal K., Mohan M. M., Thomas S. Dynamic application of novel electro-optic switchable device modulation by graphene oxide dispersed liquid crystal cell assembling CdS nanowires // Organic Electronics: physics, materials, applications. 2016. 39. 25-37. DOI: 10.1016/j.orgel.2016.09.019Pal K., Mohan M. M., Thomas S. Dynamic application of novel electro-optic switchable device modulation by graphene oxide dispersed liquid crystal cell assembling CdS nanowires // Organic Electronics: physics, materials, applications. 2016. 39. 25-37. DOI: 10.1016/j.orgel.2016.09.019Reisgen U., Balashov B., Stein L., Geffers C. Nanophase hardfacing. New possibilities for functional surfaces // Materials Science Forum. 2010. 638/642. 870-875. DOI: 10.4028/www.scientific.net/MSF.638-642.870Reisgen U., Balashov B., Stein L., Geffers C. Nanophase hardfacing. New possibilities for functional surfaces // Materials Science Forum. 2010. 638/642. 870-875. DOI: 10.4028/www.scientific.net/MSF.638-642.870Lee Т. К., Kim H. J., Kang B. Y., Hwang S. K. Effect of Inclusion Size on the Nucleation of Acicular Ferrite in Welds // ISIJ International. 2000. 40(12). 1260-1268. DOI: 10.2355/isijinternational.40.1260Lee Т. К., Kim H. J., Kang B. Y., Hwang S. K. Effect of Inclusion Size on the Nucleation of Acicular Ferrite in Welds // ISIJ International. 2000. 40(12). 1260-1268. DOI: 10.2355/isijinternational.40.1260Seo J. S., Kim Н. J., Lee C. Effect of Ti addition on eeld microstructure and inclusion characteristics of bainitic GMA welds // ISIJ International. 2013. 53(5). 880-886. DOI: 10.2355/isijinternational.53.880Seo J. S., Kim Н. J., Lee C. Effect of Ti addition on eeld microstructure and inclusion characteristics of bainitic GMA welds // ISIJ International. 2013. 53(5). 880-886. DOI: 10.2355/isijinternational.53.880Vanovsek W., Bernhard С., Fiedler M., Posch G. Influence of aluminum content on the characterization of microstructure and inclusions in high-strength steel welds // Welding in the World. 2013. 57(1). 73-83. DOI: 10.1007/s40194-012-0008-0Vanovsek W., Bernhard С., Fiedler M., Posch G. Influence of aluminum content on the characterization of microstructure and inclusions in high-strength steel welds // Welding in the World. 2013. 57(1). 73-83. DOI: 10.1007/s40194-012-0008-0Wang J.-Y., Chang T.-C., Chang L.-Z., Lee S. Effect of Al and Mn Content on the Mechanical Properties of Various ECAE Processed Mg-Li-Zn Alloys // Materials Transactions. 2006. 47(4). 971-976. DOI: 10.2320/matertrans.47.971Wang J.-Y., Chang T.-C., Chang L.-Z., Lee S. Effect of Al and Mn Content on the Mechanical Properties of Various ECAE Processed Mg-Li-Zn Alloys // Materials Transactions. 2006. 47(4). 971-976. DOI: 10.2320/matertrans.47.971Klimpel А., Kik T. Erosion and abrasion wear resistance of GMA wire surfaced nanostructural deposits // Archives of Materials Science and Engineering. 2008. 30(2). 121-124.Klimpel А., Kik T. Erosion and abrasion wear resistance of GMA wire surfaced nanostructural deposits // Archives of Materials Science and Engineering. 2008. 30(2). 121-124.Zhu Y., Yukimura K., Ding C. X., Zhang P. Y. Tribological properties of nanostructured and conventional WC-Co coatings deposited by plasma spraying // Thin Solid Films. 2001. 388(1-2). 277-282. DOI: 10.1016/S0040-6090(01)00805-7Zhu Y., Yukimura K., Ding C. X., Zhang P. Y. Tribological properties of nanostructured and conventional WC-Co coatings deposited by plasma spraying // Thin Solid Films. 2001. 388(1-2). 277-282. DOI: 10.1016/S0040-6090(01)00805-7Wu P., Du H. M., Chen X. L., Li Z. Q., Bai H. K., Jiang E. Y. Influens of WC particle behavior on the wear resistance properties of Ni-WC composite coatings // Wear. 2004. 257(1-2). 142-147. DOI: 10.1016/j.wear.2003.10.019Wu P., Du H. M., Chen X. L., Li Z. Q., Bai H. K., Jiang E. Y. Influens of WC particle behavior on the wear resistance properties of Ni-WC composite coatings // Wear. 2004. 257(1-2). 142-147. DOI: 10.1016/j.wear.2003.10.019Gualco A., Svoboda H. G., Surian E. S. Effect of welding parameters on microstructure of Fe-based nanostructured weld overlay deposited through FCAW-S // Welding International. 2016. 30(8). 573-580. DOI: 10.1080/09507116.2015.1096533Gualco A., Svoboda H. G., Surian E. S. Effect of welding parameters on microstructure of Fe-based nanostructured weld overlay deposited through FCAW-S // Welding International. 2016. 30(8). 573-580. DOI: 10.1080/09507116.2015.1096533Chen C. X., Peng H., Liu R., Li Y., Zhao P. Research on inclusions in low alloy steel welds with nano alumina addition // Journal of Computational and Theoretical Nanoscience. 2012. 9(9). 1533-1536. DOI: 10.1166/jctn.2012.2239Chen C. X., Peng H., Liu R., Li Y., Zhao P. Research on inclusions in low alloy steel welds with nano alumina addition // Journal of Computational and Theoretical Nanoscience. 2012. 9(9). 1533-1536. DOI: 10.1166/jctn.2012.2239Chen C., Xue H., Chen C., Han X., Tang H. Effect of nano oxide on microstructure and mechanical properties of low alloy high strength steel welds // Hanjie Xuebao/Transactions of the China Welding Institution. 2016. 37(9). 29-34.Chen C., Xue H., Chen C., Han X., Tang H. Effect of nano oxide on microstructure and mechanical properties of low alloy high strength steel welds // Hanjie Xuebao/Transactions of the China Welding Institution. 2016. 37(9). 29-34.Saha A., Mondal S. C. Multi-objective Optimization of Welding Parameters in MMAW for Nano-structured Hardfacing Material Using GRA Coupled with PCA // Source of the Document Transactions of the Indian Institute of Metals. 2016. 70. 1431-1502. DOI: 10.1007/s12666-016-0945-1Saha A., Mondal S. C. Multi-objective Optimization of Welding Parameters in MMAW for Nano-structured Hardfacing Material Using GRA Coupled with PCA // Source of the Document Transactions of the Indian Institute of Metals. 2016. 70. 1431-1502. DOI: 10.1007/s12666-016-0945-1Liang X. S., Chen C. X., Peng H. F. Effect of nano-scale titanium oxide on the microstructure of weld deposits for high strength low alloyed steel // Cailiao Kexue yu Gongyi/Material Science and Technology. 2009. 17. 41-45.Liang X. S., Chen C. X., Peng H. F. Effect of nano-scale titanium oxide on the microstructure of weld deposits for high strength low alloyed steel // Cailiao Kexue yu Gongyi/Material Science and Technology. 2009. 17. 41-45.Aghakhani M., Naderian P. Aghakhani M. Modeling and optimization of dilution in SAW in the presence of Cr2O3 nano-particles // International Journal of Advanced Manufacturing Technology. 2015. 78(9-12). 1665-1676. DOI: 10.1007/s00170-014-6733-3Aghakhani M., Naderian P. Aghakhani M. Modeling and optimization of dilution in SAW in the presence of Cr2O3 nano-particles // International Journal of Advanced Manufacturing Technology. 2015. 78(9-12). 1665-1676. DOI: 10.1007/s00170-014-6733-3Aghakhani M., Ghaderi M. R., Jalilian M. M., Derakhshan A. A. Predicting the combined effect of TiO2 nano-particles and welding input parameters on the hardness of melted zone in submerged arc welding by fuzzy logic // Journal of Mechanical Science and Technology. 2013. 27(7). 2107-2113. DOI: 10.1007/s12206-013-0523-yAghakhani M., Ghaderi M. R., Jalilian M. M., Derakhshan A. A. Predicting the combined effect of TiO2 nano-particles and welding input parameters on the hardness of melted zone in submerged arc welding by fuzzy logic // Journal of Mechanical Science and Technology. 2013. 27(7). 2107-2113. DOI: 10.1007/s12206-013-0523-yTashev P., Kirilov L., Petrov T., Koprinkova-Christova P., Lukarski Y. Optimization of the parameters for pulsed current tig remelting in nano modification of surface layers of structural steel parts // Scientific proceedings. 2016. 1(187). 118-121.Tashev P., Kirilov L., Petrov T., Koprinkova-Christova P., Lukarski Y. Optimization of the parameters for pulsed current tig remelting in nano modification of surface layers of structural steel parts // Scientific proceedings. 2016. 1(187). 118-121.Reisgen U., Balashov B., Stein L., Geffers C. Nanophase hardfacing new possibilities for functional surfaces // Materials Science Forum. 2010. 638-642. 870-875. DOI: 10.4028/www.scientific.net/MSF.638-642.870Reisgen U., Balashov B., Stein L., Geffers C. Nanophase hardfacing new possibilities for functional surfaces // Materials Science Forum. 2010. 638-642. 870-875. DOI: 10.4028/www.scientific.net/MSF.638-642.870Hsu P. W., Chen R. S., Kao F. H., Tsai S.-Y., Duh J.-G., Wang S.-H., Yang J.-R. Martensite nucleation site and grain refinement in duplex titanium alloy weldment by active flux with nanoparticle addition // Science and Technology of Welding and Joining. 2011. 16(6). 514-521. DOI: 10.1179/1362171811Y.0000000038Hsu P. W., Chen R. S., Kao F. H., Tsai S.-Y., Duh J.-G., Wang S.-H., Yang J.-R. Martensite nucleation site and grain refinement in duplex titanium alloy weldment by active flux with nanoparticle addition // Science and Technology of Welding and Joining. 2011. 16(6). 514-521. DOI: 10.1179/1362171811Y.0000000038Yang J., Hou X., Zhang P., Ren X., Yang Q. Mechanical properties of the hypereutectoid Fe-Cr-C hardfacing coatings with different nano-Y2O3 additives and the mechanism analysis // Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 2016. 655. 346-354. DOI: 10.1016/j.msea.2015.12.087Yang J., Hou X., Zhang P., Ren X., Yang Q. Mechanical properties of the hypereutectoid Fe-Cr-C hardfacing coatings with different nano-Y2O3 additives and the mechanism analysis // Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 2016. 655. 346-354. DOI: 10.1016/j.msea.2015.12.087Kuznetsov M. A., Zernin E. A., Danilov V. I., Zhuravkov S. P., Kryukov A. V. Optimization of the modification parameters of a deposited metal by nanostructural fibers of the aluminium oxyhydroxide // Nanotechnologies in Russia. 2018. 13(9-10). 521-530. DOI: 10.1134/S1995078018050087Kuznetsov M. A., Zernin E. A., Danilov V. I., Zhuravkov S. P., Kryukov A. V. Optimization of the modification parameters of a deposited metal by nanostructural fibers of the aluminium oxyhydroxide // Nanotechnologies in Russia. 2018. 13(9-10). 521-530. DOI: 10.1134/S1995078018050087Markashova L., Berdnikova O., Alekseienko T., Bernatskyi A., Sydorets V. Nanostructures in Welded Joints and Their Interconnection with Operation Properties // Achievements in the field of thin films, nanostructured materials and coatings: selected reports of the 2018 International Conference “Nanomaterials: Applications and Properties” / edited by A. D.Pogrebnyak, V. Novosad. Springer, Singapore, 2019. 119-128. DOI: 10.1007/978-981-13-6133-3_12Markashova L., Berdnikova O., Alekseienko T., Bernatskyi A., Sydorets V. Nanostructures in Welded Joints and Their Interconnection with Operation Properties // Achievements in the field of thin films, nanostructured materials and coatings: selected reports of the 2018 International Conference “Nanomaterials: Applications and Properties” / edited by A. D.Pogrebnyak, V. Novosad. Springer, Singapore, 2019. 119-128. DOI: 10.1007/978-981-13-6133-3_12Saha A., Mondal S. C. Statistical Analysis and Optimization of Process Parameters in Wire Cut Machining of Welded Nanostructured Hardfacing Material // Silicon. 2019. 13(9-10). 1313-1326. DOI: 10.1007/s12633-018-9924-ySaha A., Mondal S. C. Statistical Analysis and Optimization of Process Parameters in Wire Cut Machining of Welded Nanostructured Hardfacing Material // Silicon. 2019. 13(9-10). 1313-1326. DOI: 10.1007/s12633-018-9924-yBond D., Lussoli R. J., Rodrigues Neto J. B., D'Oliveira A. S. Co-based superalloy (Stellite 6) powder with added nanoparticles to be molten by PTA // Soldagem & Inspeção. 2020. 25(5). 2514. DOI: 10.1590/0104-9224/si25.14Bond D., Lussoli R. J., Rodrigues Neto J. B., D'Oliveira A. S. Co-based superalloy (Stellite 6) powder with added nanoparticles to be molten by PTA // Soldagem & Inspeção. 2020. 25(5). 2514. DOI: 10.1590/0104-9224/si25.14Sokoluk M., Cao C., Pan S., Li X. Nanoparticle-enabled phase control for arc welding of unweldable aluminum alloy 7075 // Nature Communication. 2019. 10(1). 98. DOI: 10.1038/s41467-018-07989-ySokoluk M., Cao C., Pan S., Li X. Nanoparticle-enabled phase control for arc welding of unweldable aluminum alloy 7075 // Nature Communication. 2019. 10(1). 98. DOI: 10.1038/s41467-018-07989-yBian H., Song Y., Liu D., Lei Y., Cao J., Song X. Joining of SiO2 ceramic and TC4 alloy by nanoparticles modified brazing filler metal // Chinese Journal of Aeronautics. 2019. 33(1). 41-45. DOI: 10.1016/j.cja.2019.03.040Bian H., Song Y., Liu D., Lei Y., Cao J., Song X. Joining of SiO2 ceramic and TC4 alloy by nanoparticles modified brazing filler metal // Chinese Journal of Aeronautics. 2019. 33(1). 41-45. DOI: 10.1016/j.cja.2019.03.040Furkan, Kim H.-J., Lee G.-h., Jung J. P. A Review of the Brazeability of LowTemperature and Nano-Reinforced Al-Based Brazing Filler Metals// Journal of Welding and Joining. 2022. 40(3). 216-224. DOI: 10.5781/JWJ.2022.40.3.2Furkan, Kim H.-J., Lee G.-h., Jung J. P. A Review of the Brazeability of LowTemperature and Nano-Reinforced Al-Based Brazing Filler Metals// Journal of Welding and Joining. 2022. 40(3). 216-224. DOI: 10.5781/JWJ.2022.40.3.2Huang Z., Zhao Z. J., Zhang Q., Xan L., Jiang X.-m., Li C., Perts cardenas M. T., Yuang P., Yin J.-J., Luo J., Gahg J., Nie Z. A welding phenomenon of dissimilar nanoparticles in dispersion // Nature Communication. 2019. 10(1). 219. DOI: 10.1038/s41467-018-08206-6Huang Z., Zhao Z. J., Zhang Q., Xan L., Jiang X.-m., Li C., Perts cardenas M. T., Yuang P., Yin J.-J., Luo J., Gahg J., Nie Z. A welding phenomenon of dissimilar nanoparticles in dispersion // Nature Communication. 2019. 10(1). 219. DOI: 10.1038/s41467-018-08206-6Dele-Afolabi T. T., Ansari M. N. M., Azmah Hanim M. A., Adeleke A. O., Ojokupoluyi O. J., Atiqah A. Recent advances in Sn-based lead-free solder interconnects for microelectronics packaging: Materials and technologies // Journal of Materials Research and Technology. 2023. 25(33). 4231-4263. DOI: 10.1016/j.jmrt.2023.06.193Dele-Afolabi T. T., Ansari M. N. M., Azmah Hanim M. A., Adeleke A. O., Ojokupoluyi O. J., Atiqah A. Recent advances in Sn-based lead-free solder interconnects for microelectronics packaging: Materials and technologies // Journal of Materials Research and Technology. 2023. 25(33). 4231-4263. DOI: 10.1016/j.jmrt.2023.06.193Ahn, B. Recent Advances in Brazing Fillers for Joining of Dissimilar Materials // Metals. 2021. 11(7). 1037. DOI: 10.3390/met11071037Ahn, B. Recent Advances in Brazing Fillers for Joining of Dissimilar Materials // Metals. 2021. 11(7). 1037. DOI: 10.3390/met11071037Praveen A. S., Arjunan A. Effect of nano-Al2O3 addition on the microstructure and erosion wear of HVOF sprayed NiCrSiB coatings // Materials Research Express. 2019. 7(1). 015006. DOI: 10.1088/2053-1591/ab5bdaPraveen A. S., Arjunan A. Effect of nano-Al2O3 addition on the microstructure and erosion wear of HVOF sprayed NiCrSiB coatings // Materials Research Express. 2019. 7(1). 015006. DOI: 10.1088/2053-1591/ab5bdaKuznetsov M. A., Zernin E. A. Nanotechnologies and nanomaterials in welding production (review) // Welding International. 2012. 26(4). 311-313. DOI: 10.1080/09507116.2011.606158Kuznetsov M. A., Zernin E. A. Nanotechnologies and nanomaterials in welding production (review) // Welding International. 2012. 26(4). 311-313. DOI: 10.1080/09507116.2011.606158

The authors declare that there are no conflicts of interest present.